трехкоординатные сверлильные станкиFreatures: |
1.PC beside the machine |
2.Unclamping drill holder |
3.Auto Zero referencing in the X-axis direction |
4.X-axis horizontal working length 12.200 mm |
5.Stroke Y-axis 550 mm |
6.Manual lubricating system for the machine |
7.Clamping drilling column on the drilling table |
8.Furthermore, direct programming on the machine is possible |
9.Internal/external oil mist drill cooling (air-oil, micro drop) |
10.Y-axis horizontal movement perpendicular on the X-axis |
 |